需先按照下方示意圖正確插入4G物聯網卡以及4G天線
選擇4G聯網,須在聯網方式中選擇4G聯網,提交配置后重啟網關;出廠默認設置為4G聯網,無需進行任何配置
將WIFI 天線插入網關的USB口進行連接
直接搜尋附近熱點選擇連接后輸入密碼;
點擊測試WIFI,測試是否可以連接成功;
在聯網方式中選擇WIFI聯網,提交配置后重啟網關即可
將網線連接至電腦
網絡配置中選擇WAN/LAN,網口類型選擇WAN,再自動獲取IP;
在聯網方式中選擇有線聯網,提交配置后重啟網關即可

Please insert the 4G IoT card and 4G antenna correctly according to the diagram below first
To choose 4G networking, you must select 4G networking in the networking method, submit the configuration, and restart the gateway; The factory default setting is 4G networking, no configuration required
Insert the WIFI antenna into the USB port of the gateway for connection
Directly search for nearby hotspots, select a connection, and enter the password;
Click to test WIFI and see if the connection is successful;
Select WIFI networking in the networking mode, submit the configuration, and restart the gateway
Connect the network cable to the computer
Select WAN/LAN in the network configuration, select WAN for the network port type, and then automatically obtain the IP address;
Select wired networking in the networking method, submit the configuration, and restart the gateway
